60pcs/set 12V 12000RPM Mini Drill EU / US Adapter Electric Grinder Rotary Tool Kit for Grinding / Polishing / Engraving


  • Products Model: EPC_POW_009
  • EAN: 4895192456225
  • Brand: Chglmposs
  • No-load Speed: 12000 rpm
  • Frequency: 50 / 60Hz
  • Rated Voltage: 12V
  • Power Source: Electricity
  • Rated Torque: 3 N·m
  • Application: Wooden
  • Usage: Home DIY
  • Features:
    – 12000RPM no load speed.
    – The grinder engraving kit is necessary for DIY carving and grinding.
    – This electric carving tool has very mini grinder body, convenient to use.
    – Suitable for agate nuclear carving, wood carving.
    – For grinding aluminum plate, thin copper board, plastic board, chipboard, printed circuit board, epoxy board.
    – Perfect electric grinder for cutting, engraving, milling, grinding, polishing, removing and drilling.
  • Input Voltage: 110-220V
  • Plug Standard: EU / US
  • For Safe Use:
    – Wear safety goggles to protect your eyes.
    – When you finish using the unit, switch off the motor and ensure that all moving parts have come to a complete standstill.
    – Before using additional accessories not included in this set, always compare the maximum allowed RPM of that specific accessory with the RPM of this tool.
    – In case o electrical or mechanical malfunction, immediately switch off the tool.
    – Do not activate switch when changing accessories.
    – Never use grinding wheels over 1”(25.4mm) in diameter.
    – Never use drill bits over 1/8”(3.2mm) in diameter.
    – Never use the shaft lock when toll is running.
    – Ensure that the collet size corresponds with the shaft size of the accessory.
    – Store tool in locations where temperature will not exceed 50 degrees Celsius.
  • How to Change Accessories:
    – Switch drill of and make sure not to accidentally switch on while changing accessories.
    – Press down on the Chuck Lock Button. Then you can loosen and pull off the Chuck Nut by turning it anti-clockwise. Under the chuck nut is one of the Collets.
    – Choose the correct size Collet for the accessory you want to use and insert into place. Replace the Chuck Nut but do not tighten completely.
    – Insert the accessory into the Chuck Nut.
    – While pressing down on the Chuck Lock Button, tighten the Chuck Nut by turning clockwise.
  • Place of Application: Polishing,Grinding,Engraving,Sanding,Graving
  • Product Weight : 197 G / 6.95 Ounces
  • Product Dimensions (L*W*H) : 300*250*60 MM / 11.81*9.84*2.36 Inches
  • Package Weight : 610.0 G / 21.52 Ounces
  • Package Dimensions (L*W*H) : 300*250*60 MM / 11.81*9.84*2.36 Inches
  • Retail Packaging: Yes, General Box

Package Include:

  • 20 x Diamond Burr
  • 10 x Mounted Stone
  • 6 x Sanding Drum
  • 5 x Cut-off Wheel
  • 4 x Brass Collet
  • 4 x Drill Bit
  • 4 x Buffing Wheel
  • 3 x Wire Wheel
  • 2 x Connections Post
  • 1 x Grinding Stone
  • 1 x Engraving Bit