Features: – Small size, easy to carry. – Different specifications, to meet your different needs. – Meet all of your cutting and drilling needs with the HSS hole saw. – Perfect for installing locks, cabinet and door knobs, or drilling large holes. – Cuts stainless steel, copper, brass, aluminum, fiberglass, formica, and other laminates in seconds.
Model: HSS Drill Bit
Drilling Diameter: 16 / 18.5 / 20 / 25 / 30mm
Place of Application: Installing Locks，Door Knobs
Product Weight : 347 G / 12.24 Ounces
Product Dimensions (L*W*H) : 150*120*30 MM / 5.91*4.72*1.18 Inches
Package Weight : 347.0 G / 12.24 Ounces
Package Dimensions (L*W*H) : 150*120*30 MM / 5.91*4.72*1.18 Inches
Features: – Natural color three edge mill cutter – It is suitable for use in the work-piece which the hardness is under 25 degrees, – Such as aluminum sheet, thin iron plate, the insulating board or PVC board – It’s very sharp and durable,you use it for a long time.
Features: – Easy to use and install – Conveniently, safely & quickly – Easily locks onto and releases drill bits – Allows hex drive power tools to use conventional drill bits – Use This Chuck to Convert Any cordless Screwdriver into a drill or grinder
Function: Convert 1/4 ” hex shank screwdriver into a drill. It will hold drill bits and accessories up to 1/4 “in diameter
Driver Shank: 1/4 “Hex
Place of Application: Electric Grinder
Product Weight : 30 G / 1.06 Ounces
Product Dimensions (L*W*H) : 90*22*22 MM / 3.54*0.87*0.87 Inches
Package Weight : 42.0 G / 1.48 Ounces
Package Dimensions (L*W*H) : 105*70*20 MM / 4.13*2.76*0.79 Inches
Features: – Easy to use and install – Conveniently, safely & quickly – Easily locks onto and releases drill bits – Allows hex drive power tools to use conventional drill bits – Use This Chuck to Convert Any cordless Screwdriver into a drill or grinder
Function: Convert 1/4 ” hex shank screwdriver into a drill. It will hold drill bits and accessories up to 1/4 “in diameter
Driver Shank: 1/4 “Hex
Place of Application: Electric Grinder
Product Weight : 30 G / 1.06 Ounces
Product Dimensions (L*W*H) : 90*22*22 MM / 3.54*0.87*0.87 Inches
Package Weight : 42.0 G / 1.48 Ounces
Package Dimensions (L*W*H) : 105*70*20 MM / 4.13*2.76*0.79 Inches
Features: – Chamfering five blade, chip faster, more smooth sink hole. – Five edge chamfer is in the use of the process can be faster discharge chips, disposable smooth drilled countersink the screw cap embedded perfect surface.
Chamfer Diameter: 15mm
Chamfering Specifications: Five Blade
Place of Application: Drill Bit
Note: This product is best used in conjunction with bench, hand drill during operation centered instability, leading to easy bending and breaking the drill.
Product Weight : 25 G / 0.88 Ounces
Product Dimensions (L*W*H) : 61*15*15 MM / 2.40*0.59*0.59 Inches
Package Weight : 25.0 G / 0.88 Ounces
Package Dimensions (L*W*H) : 61*15*15 MM / 2.40*0.59*0.59 Inches
Features: – Excellent replacement or upgrade compatible with thousands of model corded and cordless drills. – Works with any 3/8-in – 24 UNF mount. – Tight grip easy to turn by hand.
Thread Mount: 3/8in – 24UNF
Place of Application: Drill Chuck
Product Weight : 150 G / 5.29 Ounces
Product Dimensions (L*W*H) : 50*40*40 MM / 1.97*1.57*1.57 Inches
Package Weight : 150.0 G / 5.29 Ounces
Package Dimensions (L*W*H) : 50*40*40 MM / 1.97*1.57*1.57 Inches
Features: – Full copper movement of motor, with metal protective shell, high speed, high torque. – Original adapter(Input: 100 ~ 240V AC), wide voltage also suitable for US and EU. – With LED light, provide convenience for working in the darkness. – Two-speed adjustment button, easy to switch fast and slow gear. – Intelligent speed control button that can deal with speed adjustment perfectly, without extra operation. – Genuine a class battery, has the protection of anti overcharge and anti explosion. – Power indicator light, easy to know the use situation of the battery. – With button to control forward and reverse rotation, pushing it to right, the screwdriver will rotate anticlockwise; pushing it to left, the screwdriver will rotate clockwise; pushing it to middle will clock the switch. – The battery can be removed easily by press the button in it. – 18 gear torque for you to choose. – EU / US plug (Small cylinder and flat plug).
Adapter Parameters: – Model: DW-126080 – Input: 100 ~ 240 V AC, 50 / 60Hz – Power Adapter: US / EU – Wire Length: 900 MM(approx) – Output: 12 V, 800 mA
Bit Holder Way: Screwdriver Catch Bit
Speed: No gear adjustable speed
Applications: – Tighten and loosen screws. – Tighten and loosen nuts. – Punching, such as wall perforation, wood drilling.
Attention: – Please charge with original adapter. – Charge in 10 ~ 40 ℃ surroundings. The most appropriate charging temperature is 20 ~ 25 ℃. – Charger with a safety device, the battery will automatically cut off power when charge full. – Do not allow impurities to enter the charger connection hole. – Do not disassemble the battery and charger. – Do not make the battery short-circuit. – Do not throw the battery into fire. – When loading the screwdriver into a chuck without switch, tighten the sleeve appropriately to avoid the bit sliding.
Place of Application: Handling Screws，Punching
Product Weight : 1252 G / 44.16 Ounces
Product Dimensions (L*W*H) : 190*185*60 MM / 7.48*7.28*2.36 Inches
Package Weight : 1276.0 G / 45.01 Ounces
Package Dimensions (L*W*H) : 261*196*64 MM / 10.28*7.72*2.52 Inches
DIY Supplies: Drilling use of jade, jadeite, Buddha beads, etc
Features: – Length is 36mm – Needle diameter is 1mm – Applications: jade, agate, stone, crystal, jewelry, ceramics, glass, semiconductor material drilling
Place of Application: Drill Bit，Small Bench Drill，Mills
Note: Install the hole opener on the electric hand drill or small bench drill land use it. Because this kind of hole opener has no center positioning bit, the hole opener should be tilted at 45, the speed of electric drill should be slowed down, and the glass stone should be contacted slowly. Open the hole so as to open one month’s standard crescent groove for positioning. Do not make the opening too fast. It is necessary to add water continuously to cool the opening device When drilling, clean water is needed to cool the drill bit. Good cooling can significantly extend the service life of the hole opener. Do not dry the drill without water, otherwise it may cause damage to the drill.
Product Weight : 2 G / 0.07 Ounces
Product Dimensions (L*W*H) : 40*10*10 MM / 1.57*0.39*0.39 Inches
Package Weight : 2.0 G / 0.07 Ounces
Package Dimensions (L*W*H) : 40*10*10 MM / 1.57*0.39*0.39 Inches
Features: – Made of alloy material, good quality. – Available in grinding machine (dental drill) and other equipment. – It can be used in hardware, hobby, home etc. – Drill chuck quick change adapter, portable to use.
Shank Diameter: 3mm/0.11inch
Suitable: for Rotary Tool, grinding machine, dental drill and other equipment.
Place of Application: Rotary Tool
Product Weight : 20 G / 0.71 Ounces
Product Dimensions (L*W*H) : 40*10*10 MM / 1.57*0.39*0.39 Inches
Package Weight : 12.0 G / 0.42 Ounces
Package Dimensions (L*W*H) : 40*10*10 MM / 1.57*0.39*0.39 Inches
Features: – Made of alloy material, good quality. – Available in grinding machine (dental drill) and other equipment. – It can be used in hardware, hobby, home etc. – Drill chuck quick change adapter, portable to use.
Shank Diameter: 3mm/0.11inch
Suitable: for Rotary Tool, grinding machine, dental drill and other equipment.
Place of Application: Rotary Tool
Product Weight : 20 G / 0.71 Ounces
Product Dimensions (L*W*H) : 40*10*10 MM / 1.57*0.39*0.39 Inches
Package Weight : 12.0 G / 0.42 Ounces
Package Dimensions (L*W*H) : 40*10*10 MM / 1.57*0.39*0.39 Inches
Features: – 100% brand-new and noble quality. – Suitable for electric drill, screwdriver, wind batch transfer using to play the role of releasing bit holder. – Can be used for prolonging different kinds of screwdrivers. – The interface has a locking function: it will be self locked while a drill bit connect to it, grip the black chuck by your one hand and push the hex shank by your another hand, then the connecting drill bit can be pulled out. – Built-in magnetic, fast, fastening, greatly improve work efficiency. – Rustproof, very durable, convenient to use.
Length: 60mm
Place of Application: Hex Bit Drill
Product Weight : 24 G / 0.85 Ounces
Product Dimensions (L*W*H) : 100*100*50 MM / 3.94*3.94*1.97 Inches
Package Weight : 24.0 G / 0.85 Ounces
Package Dimensions (L*W*H) : 100*100*50 MM / 3.94*3.94*1.97 Inches
Retail Packaging: No, No Packing
Package Include:
1 x 1/4in Drive Shank Quick Change Bit Drill Chuck
