Features: – 12000RPM no load speed. – The grinder engraving kit is necessary for DIY carving and grinding. – This electric carving tool has very mini grinder body, convenient to use. – Suitable for agate nuclear carving, wood carving. – For grinding aluminum plate, thin copper board, plastic board, chipboard, printed circuit board, epoxy board. – Perfect electric grinder for cutting, engraving, milling, grinding, polishing, removing and drilling.
Input Voltage: 110-220V
Plug Standard: EU / US
For Safe Use: – Wear safety goggles to protect your eyes. – When you finish using the unit, switch off the motor and ensure that all moving parts have come to a complete standstill. – Before using additional accessories not included in this set, always compare the maximum allowed RPM of that specific accessory with the RPM of this tool. – In case o electrical or mechanical malfunction, immediately switch off the tool. – Do not activate switch when changing accessories. – Never use grinding wheels over 1”(25.4mm) in diameter. – Never use drill bits over 1/8”(3.2mm) in diameter. – Never use the shaft lock when toll is running. – Ensure that the collet size corresponds with the shaft size of the accessory. – Store tool in locations where temperature will not exceed 50 degrees Celsius.
How to Change Accessories: – Switch drill of and make sure not to accidentally switch on while changing accessories. – Press down on the Chuck Lock Button. Then you can loosen and pull off the Chuck Nut by turning it anti-clockwise. Under the chuck nut is one of the Collets. – Choose the correct size Collet for the accessory you want to use and insert into place. Replace the Chuck Nut but do not tighten completely. – Insert the accessory into the Chuck Nut. – While pressing down on the Chuck Lock Button, tighten the Chuck Nut by turning clockwise.
Place of Application: Polishing，Grinding，Engraving，Sanding，Graving
Product Weight : 197 G / 6.95 Ounces
Product Dimensions (L*W*H) : 300*250*60 MM / 11.81*9.84*2.36 Inches
Package Weight : 610.0 G / 21.52 Ounces
Package Dimensions (L*W*H) : 300*250*60 MM / 11.81*9.84*2.36 Inches
Features: – Full copper movement of motor, with metal protective shell, high speed, high torque. – Original adapter(Input: 100 ~ 240V AC), wide voltage also suitable for US and EU. – With LED light, provide convenience for working in the darkness. – Two-speed adjustment button, easy to switch fast and slow gear. – Intelligent speed control button that can deal with speed adjustment perfectly, without extra operation. – Genuine A class battery, has the protection of anti overcharge and anti explosion. – Power indicator light, easy to know the use situation of the battery. – With button to control forward and reverse rotation, pushing it to right, the screwdriver will rotate anticlockwise; pushing it to left, the screwdriver will rotate clockwise; pushing it to middle will clock the switch. – The battery can be removed easily by press the button in it. – 18 gear torque for you to choose. – EU / US plug (Small cylinder and flat plug).
Adapter Parameters: – Model: DW-126080 – Input: 100 ~ 240 V AC, 50 / 60Hz – Power Adapter: US / EU – Wire Length: 900 MM(approx) – Output: 12 V, 800 mA – Charging Time: 1.5 hours
Bit Holder Way: Screwdriver Catch Bit
Speed: No gear adjustable speed
Applications: – Tighten and loosen screws. – Tighten and loosen nuts. – Punching, such as wall perforation, wood drilling.
Attention: – Please charge with original adapter. – Charge in 10 ~ 40 ℃ surroundings. The most appropriate charging temperature is 20 ~ 25 ℃. – Charger with a safety device, the battery will automatically cut off power when charge full. – Do not allow impurities to enter the charger connection hole. – Do not disassemble the battery and charger. – Do not make the battery short-circuit. – Do not throw the battery into fire. – When loading the screwdriver into a chuck without switch, tighten the sleeve appropriately to avoid the bit sliding.
Place of Application: Handling Screws，Punching
Product Weight : 1100 G / 38.80 Ounces
Product Dimensions (L*W*H) : 190*185*60 MM / 7.48*7.28*2.36 Inches
Package Weight : 1020.0 G / 35.98 Ounces
Package Dimensions (L*W*H) : 261*196*64 MM / 10.28*7.72*2.52 Inches
Features: – Full copper movement of motor, with metal protective shell, high speed, high torque. – Original adapter(Input: 100 ~ 240V AC), wide voltage also suitable for US and EU. – With LED light, provide convenience for working in the darkness. – Speed adjustment button, easy to switch fast and slow gear. – Intelligent speed control button that can deal with speed adjustment perfectly, without extra operation. – Genuine A class battery, has the protection of anti overcharge and anti explosion. – With button to control forward and reverse rotation, pushing it to right, the screwdriver will rotate anticlockwise; pushing it to left, the screwdriver will rotate clockwise; pushing it to middle will clock the switch. – The battery can be removed easily by press the button in it. – 18 gear torque for you to choose. – EU plug(plug for the small cylindrical).
Adapter Parameters: – Model: DW-126080 – Input: 100 ~ 240 V AC – Power Adapter: US / EU – Wire Length: 900 MM(approx) – Output: 12.6 V, 800 mA
Bit Holder Way: Screwdriver Catch Bit
Speed: No gear adjustable speed
Applications: – Tighten and loosen screws. – Tighten and loosen nuts. – Punching, such as wall perforation, wood drilling.
Attention: – Please charge with original adapter. – Charge in 10 ~ 40 ℃ surroundings. The most appropriate charging temperature is 20 ~ 25 ℃. – Charger with a safety device, the battery will automatically cut off power when charge full. – Do not allow impurities to enter the charger connection hole. – Do not disassemble the battery and charger. – Do not make the battery short-circuit. – Do not throw the battery into fire. – When loading the screwdriver into a chuck without switch, tighten the sleeve appropriately to avoid the bit sliding.
Place of Application: Handling Screws，Punching
Product Weight : 1100 G / 38.80 Ounces
Product Dimensions (L*W*H) : 190*180*60 MM / 7.48*7.09*2.36 Inches
Package Weight : 1073.0 G / 37.85 Ounces
Package Dimensions (L*W*H) : 260*196*60 MM / 10.24*7.72*2.36 Inches
Features: – Easily switch to manual screw driving for more control – Easily switch from driving to removing screws with forward/reverse switch – Store on pegboard using integrated peg hole – Power：4 AA batteries
Type:Screwdriver Set
Material: ABS
DIY Supplies:Electrical
Power: 4 x AA batteries (not included)
Scope: Home improvement screw
Direction of Rotation: Two directions
Place of Application: Household Maintenance
Note: What’s the reason the machine won’t work? 1: Check whether the positive and negative electrodes of the battery on the back cover correspond to each otherattery contact with the four contact plates better 2: If the positive and negative poles are corresponding, the machine will still rotate while it will not rotate. Tap with a tool at the side where the pressing piece will rotate to make the left and right switch contact plates contact 3: Press the bottom of the switch as far as you can 4: If it still can’t rotate after the above methods are tested, please adjust the contact plate of the back cover to the front to make the battery contact with the four contact plates better
Product Weight : 265 G / 9.35 Ounces
Product Dimensions (L*W*H) : 200*80*46 MM / 7.87*3.15*1.81 Inches
Package Weight : 282.0 G / 9.95 Ounces
Package Dimensions (L*W*H) : 250*120*48 MM / 9.84*4.72*1.89 Inches
