Features: – Using CR-V steel and adopting overall heat treatment, high hardness process, so the item is good torque, strong and durable. – Removable bearings, when remove ball bearings adjust the screw rod; T type wire design which was was experienced heat treatment can avoid sliding wire. – Removable top. When it was broken, you can use a good one to replace it. – Bearing pullers was experienced heat treatment, forging and pressing process which is more durable and has longer service life. – The bearing puller can be freely combined into 3 claws or combined into 2 claws. – There is a circle pad on the top which can be a buffer zone to protect the hexagon not distorted.
Type: Hand Tools, Combination
Application: Car / Mechanical Repairing.
Place of Application: Car Repairing，Mechanical Repairing
Note: -1.Select two metal clips, one pull leg and one screw nut. -2. Select the holes in the same position to install the clip, and assemble the three pull legs in the same way. -3. Lead screw and screw base link. -4. link between pull leg and lead screw seat. -5.The direction of the adjustable clip keeps the direction of the claw hook consistent, that is to say, the assembly is completed.
Product Weight : 369 G / 13.02 Ounces
Product Dimensions (L*W*H) : 110*50*33 MM / 4.33*1.97*1.30 Inches
Package Weight : 369.0 G / 13.02 Ounces
Package Dimensions (L*W*H) : 110*50*33 MM / 4.33*1.97*1.30 Inches
Features: – Metal nozzle with pin valve. – Natural and environmentally friendly and non-toxic. – Perfect for cleaning camera lens, computers, keyboards, circuits,etc. – Gently remove dust & erase smudges from delicate equipment without leaving residue. – Excellent to remove dust off sensitive camera parts.
Material: Rubber, Nozzle
Place of Application: Cleaner
Product Weight : 25 G / 0.88 Ounces
Product Dimensions (L*W*H) : 90*30*30 MM / 3.54*1.18*1.18 Inches
Package Weight : 25.0 G / 0.88 Ounces
Package Dimensions (L*W*H) : 95*40*40 MM / 3.74*1.57*1.57 Inches
Features: – Fit for iPhone / iPod / Tablet / Cell Phone, etc. – Light weight, convenient to carry – With these repair tools, you’ll be able to easily disassemble your phones – Quick disassemble and install your Phone without any damage
Product Weight : 95 G / 3.35 Ounces
Product Dimensions (L*W*H) : 120*60*30 MM / 4.72*2.36*1.18 Inches
Package Weight : 95.0 G / 3.35 Ounces
Package Dimensions (L*W*H) : 120*60*30 MM / 4.72*2.36*1.18 Inches
Features: – Made of metal, durable, practical and long-term use. – Cutting speed, convenience, stability, safety. – Suitable for electric drills with a chuck diameter of less than 10mm to meet your needs. – Suitable for cutting, grinding, polishing.
Place of Application: Polishing，Grinding，Cutting
Product Weight : 356 G / 12.56 Ounces
Product Dimensions (L*W*H) : 100*75*70 MM / 3.94*2.95*2.76 Inches
Package Weight : 356.0 G / 12.56 Ounces
Package Dimensions (L*W*H) : 100*75*70 MM / 3.94*2.95*2.76 Inches
Features: – Suitable for cutting glass ceramic jade jade stone. – These high-speed diamond-coated cutting disks can be used with rotary tools to cut a variety of materials. – Suitable for narrow places and flush cuts. – Water is added when cutting, which can make the blade longer life. – When installing, please pay attention to handle as much as possible to the electric grinder, do not only clip a little.
Features: – High Speed Steel blades set for accurate, fast and precision cutting. – Suitable for timber, plastic, fiberglass, copper, aluminium & thin sheet metal etc, soft metal. – An indispensable tool for carving work.
Maximum RPM: 20,000rpm
Extension Rod Diameter: 3.175mm
Place of Application: Cutting
Note: – Do not press hard cut to hard things, remember the safe operation is the first. Please take good protection measures. – Further, the rod must be clamped at the position of two-thirds above. Speed must be controlled within 20,000 rpm. – Must tighten the screw before using it. Because electric mill is a high-speed operation tool, with a certain risk.
Product Weight : 116 G / 4.09 Ounces
Package Weight : 101.0 G / 3.56 Ounces
Package Dimensions (L*W*H) : 110*60*10 MM / 4.33*2.36*0.39 Inches
Features: – Products using 50# steel manufacturing, serrated high-frequency quenching, long life, tooth hardness HRC4-48, the working depth of 25mm. – Nice hole saw kit for drilling round holes easily and quickly. – Sharp and durable teeth of hole saw ensure a powerful and high efficient action. – Suitable for cutting wood, thin sheet metal and thin alloys, gypsum board. – After the use of a small amount of anti-rust oil on the surface of the hole saw bit to avoid natural oxidation, can improve its service life.
Features: – Made from strong HSS high speed steel, durable and firm. – Hardened steel body ensures straight, accurate cuts. – Brand New Tool zone Tools, Precision ground teeth for perfect finish cut. – Set supplied with 3.2mm diameter shank drill mandrel arbour for easy fitting in any drill. – High speed steel blade and mandrel set is ideal for fine precision cuts in laminate, aluminium, brass, copper, wood and plastic. – Endurance blade offers faster cutting and extra long life for hobbyist.
Features: – Made of high-tech material, attractive and durable, far from deforming after repeatedly bending, an excellent choice for high-strength work with hardness. – Made of high-tech material, suitable for high-strength work with hardness, not easy to deform after repeatedly pressing. – Feeling excellent with bright surface handle and anti-slip lines, perfect fit for iPhone 6, 6 Plus,Fit for Samsung S6, S6 edge Smartphone, PC, tablets, semiconductor, precision electronic components. – Precise CNC machining, more perfect on details and more accurately trimmed, can be matched with an outstanding artwork. – Lightweight, portable, anti-skid, high strength, high temperature resistance, acid and alkali resistance, high efficiency and durable. – Handy for removing and taking, when you deal with tinny things, it will act as if you have a electronic hand. – Reasonable design in accordance with finger size, more comfortable to use.
Brand: JAKEMY
Model: JM-T11
Quantity: 3
Place of Application: Tool
Note: Be careful some of them are sharp, keep them away form the children.
Product Weight : 45 G / 1.59 Ounces
Product Dimensions (L*W*H) : 160*80*20 MM / 6.30*3.15*0.79 Inches
Package Weight : 43.0 G / 1.52 Ounces
Package Dimensions (L*W*H) : 170*90*20 MM / 6.69*3.54*0.79 Inches
Features: – Cut clean and precise holes in leather, canvas and fabric – Effortlessly cut holes from 2.5 to 4.5mm in diameter – if required you can reinforce it by using the eyelet insertion attachment and eyelets supplied.
Hole Size: 2mm, 2.5mm,3mm,3.5mm,4mm,4.5mm
Color: Silver
Place of Application: Pliers
Product Weight : 261 G / 9.21 Ounces
Product Dimensions (L*W*H) : 285*115*20 MM / 11.22*4.53*0.79 Inches
Package Weight : 261.0 G / 9.21 Ounces
Package Dimensions (L*W*H) : 285*115*20 MM / 11.22*4.53*0.79 Inches
Features: – It is useful to check the tool angle when cutting threads on a metal lathe. – Check the angle on the thread cutting tool on the V groove of the gauge. – It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device.
Note: – Wipe the measuring surface of the feeler gauge with a clean cloth, and do not measure when the feeler gauge is dirty or metal septum, otherwise the accuracy of the measurement result will be affected. – Insert the feeler gauge into the measured space, pull the feeler gauge back and forth, and feel resistance, indicating that the source value of the room is close to the value marked on the feeler gauge. If the resistance is too large or too small, it means that the clearance value is less than or greater than. – Marked on the feeler gauge. When measuring and adjusting the clearance, first select the feeler gauge that meets the clearance requirements and insert it into the measured gap, and then adjust and pull the feeler gauge at the same time, When you feel a little resistance, tighten the lock nut, and the value marked by the feeler gauge is the clearance value.
Product Weight : 75 G / 2.65 Ounces
Product Dimensions (L*W*H) : 67*20*13 MM / 2.64*0.79*0.51 Inches
Package Weight : 71.0 G / 2.50 Ounces
Package Dimensions (L*W*H) : 67*20*13 MM / 2.64*0.79*0.51 Inches
Features: – Complete Hole Drilling, Tapping And Deburring / Countersinking In One Operation With Power Drill ?Saves Labor Time. – Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole. – Suitable for soft metal tapping, such as aluminum plate, 3-4mm thickness. – The advantage is opening, tapping, chamfering.
Type: Tap
Shank: 1 / 4″ (6.35mm) hex shank
DIY Supplies: Metalworking
Metric Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5
Features: – Suitable for high speed cutting and cooling. – Extend the live of the machine, update the precision of processing. – Decrease the fee of the operation and effect of process. – Can decrease the liquid waste which influence the circumstance. – Can save the cooling liquid in the range of 80%, good cooling effect. – Advantage: Cutting, drilling, tapping, cooling and lubricate.
Size: – Cardan Joint Diameter: 5mm / 0.2in
Notice: – Must use the clean liquid. – Do not use the corrosivity liquid. – The out put air pressure range should be at 5-7KGF / CM2 – The liquid viscosity should be below 68cST.
Place of Application: CNC Lathe
Product Weight : 158 G / 5.57 Ounces
Product Dimensions (L*W*H) : 300*55*20 MM / 11.81*2.17*0.79 Inches
Package Weight : 165.0 G / 5.82 Ounces
Package Dimensions (L*W*H) : 300*55*20 MM / 11.81*2.17*0.79 Inches
Features: – There is no burr on the edge of the ruler: the green edge of the feeler is free of burr, and it can’t hurt hands when touching – Heat treatment: high hardness, good elasticity, wear resistance and long life -Anti rust treatment of metal surface: the surface of each feeler gauge is coated with antirust oil, and the feeler gauge is free from rust and unfolds smoothly without jamming
Note: – Wipe the measuring surface of the feeler gauge with a clean cloth, and do not measure when the feeler gauge is dirty or metal septum, otherwise the accuracy of the measurement result will be affected. – Insert the feeler gauge into the measured space, pull the feeler gauge back and forth, and feel resistance, indicating that the source value of the room is close to the value marked on the feeler gauge. If the resistance is too large or too small, it means that the clearance value is less than or greater than. – Marked on the feeler gauge. When measuring and adjusting the clearance, first select the feeler gauge that meets the clearance requirements and insert it into the measured gap, and then adjust and pull the feeler gauge at the same time, When you feel a little resistance, tighten the lock nut, and the value marked by the feeler gauge is the clearance value.
Product Weight : 45 G / 1.59 Ounces
Product Dimensions (L*W*H) : 107*13*8 MM / 4.21*0.51*0.31 Inches
Package Weight : 44.0 G / 1.55 Ounces
Package Dimensions (L*W*H) : 110*20*10 MM / 4.33*0.79*0.39 Inches
Features: – Strong socket wrench 8 IN 1 – Especially for high-altitude operations – Reduce the labor intensity of operator, improve efficiency – A wrench instead of ordinary eight socket wrench, easy to carry. – High carbon steel forging, double layer plating wear-resistant corrosion, long service life. – The head can be rotated 360°according to the needs of choice models to use, more convenient.
Product: 8-1 Universal Socket Wrench
Type: Wrench Set
Model Number: 8/10/12/13/14/17/19/21mm
Place of Application: Wrench
Product Weight : 563 G / 19.86 Ounces
Product Dimensions (L*W*H) : 255*40*50 MM / 10.04*1.57*1.97 Inches
Package Weight : 550.0 G / 19.40 Ounces
Package Dimensions (L*W*H) : 255*40*50 MM / 10.04*1.57*1.97 Inches
Screw Head Type: Hex,Phillips,Pozidriv,Slotted,Square Socket,Torx,Y-Type,Plum Blossom
Features: – Multi-function 38-in-one screwdriver set, a set of tools in hand, disassemble repair no worry. – Anti static anti-skid handle, screwdriver head adjustable metal bayonet design, extension rod can be free to expand. – Using stainless steel, the thickness of 2mm, tweezers on both sides, refined polished chamfer, the surface of a special material coating, anti static effect better. – High-quality CRV cutter head, big hardness, wear and durable.
Model: 38 in 1 Screwdriver
Content: – 8 x Sleeve: M2.5,M3.0,M3.5,M4.0,M4.5,M5.0,M5.5,PH2 – 20 x Screw Bits: T3,4,5,6,7; H0.9,1.5,2.0,3.0;S1.0,2.0; PH1.0,1.5,2.0,3.5; U2.6; Triangle 2.0; Inner Hexagon 2.0; TX0.8; Round 1.5 – 2 x Triangle Pieces: Big,Small – 2 x Screwdriver: PH1.5,W0.8(iPhone Special) – 1 x Adjust Extension Bar – 1 x Tweezers – 1 x Extension Soft Bar – 1 x Soft Handle – 1 x Screen Sucker – 1 x Card Slot Thimble
Place of Application: Mobile Phone，Laptop Repair
Product Weight : 416 G / 14.67 Ounces
Product Dimensions (L*W*H) : 150*105*40 MM / 5.91*4.13*1.57 Inches
Package Weight : 416.0 G / 14.67 Ounces
Package Dimensions (L*W*H) : 150*105*40 MM / 5.91*4.13*1.57 Inches
Features: – 30X-21mm jeweler loupe, help you observe the jewellers more clear. – Small size, portable, adorable and practical. – Made of metal material and optical glass, high-quality and durability. – Be applied to jewelry identification. – Fantastic packaging box, protect the loupe from damages.
Quantity: 1 pcs
Color: Golden
Type: Triplet jeweler loupe
Function: 30X-21mm triplet eye jeweler loupe for jewelry identification.
Place of Application: Reading，Inspection
Note: – Please do not look at the sun with the lens in the sun, otherwise it may cause eye burns. – Please do not aim at light that is concentrated on flammable items to avoid fire. – Please do not cause serious damage to the goods. – If it is dirty, wipe the lens and body with a soft cloth.
Product Weight : 29 G / 1.02 Ounces
Product Dimensions (L*W*H) : 32*25*17 MM / 1.26*0.98*0.67 Inches
Package Weight : 49.0 G / 1.73 Ounces
Package Dimensions (L*W*H) : 60*45*25 MM / 2.36*1.77*0.98 Inches
